2 technical data – LumaSense Technologies M390 User Manual
Page 10
M390 Manual
Introduction 10
2.2 Technical Data
This
Model
Model
Part
No. Exit
Aperture Temperature
Range Power
[
] M390-A1 14029-A1 0.625
in
600-2300 °C
15KVA
[
] M390-A2 14029-A2 1
in
600-2300 °C
15KVA
[
] M390-B1 14029-B1 0.625
in
600-2600 °C
15KVA
[
] M390-B2 14029-B2 1
in
600-2600 °C
15KVA
[
] M390-C1 14029-C1 0.625
in
600-3000 °C
15KVA
[
] M390-C2 14029-C2 1
in
600-3000 °C
24KVA
[
] M390-L1 14029-L1 1
in
300-2000 °C
15KVA
Accuracy:
±0.25% of reading ±1 C
Cavity:
Closed end graphite tube 150 mm (6.0") long with 64 mm (2.50")
heated length
Source Diameter:
16 mm (.625"), 25 mm (1.00")
Emissivity
(effective from 0.6 to 1.8 µm)
1.00, ~0.96 from 3 to 15 µm
Cooling:
Water cooled. Standard hose connection on rear, 3 lpm (1 gpm)
Cooling Inlet Pressure:
90 PSI maximum
Customer is responsible to provide pressure safety valves at inlet
and outlet. Outlet (drain) must not be blocked.
Purge Gas:
Argon High Purity (99.99 % pure)
Purge Gas Inlet Pressure:
25 PSI maximum. Customer is responsible to provide over
pressure safety valves at inlet
Heating Element Type:
Graphite tube with argon gas purge, 80 lph (4-8 cfh)
Temperature Sensor:
Mikron M668L (or M680 for M390L1)
Method of Control:
Digital PID Controller
Remote Set Point:
RS232 serial communication output (RS485 optional)
Warm-up Time:
5 minutes from ambient to 2300 °C
Operating Ambient Temp.:
0 C to 44 C (32 F to 110 F)
Operating Ambient
Humidity:
0 to 90% RH non-condensing
Power Requirements:
[ ] 208 or [ ] 220 or [ ] 240 VAC ±10% [ ]50 [ ]60Hz
[ ] 15 kVA [ ] 24 kVA
Power Connector:
Customer supplied.
[ ] 15kVA
Must use plug that complies with IEC-309 at 75 Amps at 220VAC
[ ] 24kVA
Must use plug that complies with IEC-309 at125 Amps at 220VAC
Dimensions:
171 cm H x 56 cm W x 82 cm D
Maximum Weight:
182 kgs (400 lbs)