LumaSense Technologies BoilerSpection-IM Quick Start Guide - Manual (Page 3)

Powering On the Display
1. Press and hold the Power ON/OFF button for 2 sec-
onds. The power indicator will turn green.
2. Press the button to select CH4 to display picture
on the LCD screen.
Recording Video
1. During operation, press to enter Video mode.
2. Press the OK button to start recording.
3. Press the OK button again to stop recording.
Capturing Photos
1. During operation, press to enter Photo mode.
2. Press the OK button to capture photo.
Playback Video or Photo
1. During operation, press to display:
2. Press or to select folder, then press OK to
select.
3. For Videos, press or to select folder, then
press OK to play.
4. To pause, press OK when the video is playing. Press
again to resume.
5. Press to fast forward during playing status.
6. Press to rewind during playing status.
7. Press to stop or exit.
8. For Photos, press or to select picture, then
press OK to display. Press OK again to exit.
Delete Video or Photo
1. During operation, press to display the playback
screen (shown above).
2. Press or to select folder, then press OK to
select.
3. Press or to select file, then press and hold
for 2 seconds.
4. Press or to select YES, then press OK to
delete file.
OR
If you do not want to delete the selected file, select
NO and press OK to exit.
Transferring Recorded Images and
Videos to a PC
Both the standard onboard display and the optional
wireless display record images to memory cards. These
memory cards can be removed from the display and
inserted into PCs for transfer. The wireless display also
includes a USB cable that you can connect the display
directly to a PC for transfer.
Using the Hand Held Display
(Optional)
The display receives the same image from the camera,
simultaneously, as that received by the onboard display.
The user can also record snapshots and videos to the
display’s SD memory card.
Note: The camera wirelessly transmits the video signal on
Channel 4. If you have problems receiving an image, refer
to the troubleshooting section of the manual.
Inserting the Battery
1. Remove the battery compartment cover in the back
of the hand held display.
2. Align the gold contacts of the supplied battery with
corresponding connectors on the hand held display.
3. Slide the battery in until it fits into place.