LT Security LTD2316ME - Manual (Page 43)

DVR User Manual
37
SMTP Server/Port: the name and port number of SMTP server. After selecting
“This server requires a secure connection (SSL)”, user can setup mail servers
(such as Gmail) according to actual needs.
Send address/password: sender
‟s email address/password
Receive address: receiver ‟s email address. Here user can add at least three
mail addresses.
Click TEST button to test the validity of the mailbox.
Attaching image: After selecting it, the system will attach images when
sending the emails.
Fig 4-31 network configuration-email
4.6.4 Server
This function is mainly used for connecting ECMS. The user needs to
enable the active report first in the ECMS when adding a new device.
Then enter into the server interface and enable it. Input the IP address
and port of the transfer media server of ECMS. The default server port
is 2009. If it is modified, please enter into the transfer media interface
to check. After the user enables the active report, the ECMS system
will auto allot a Device ID. The user needs to check this reported
device ID in the ECMS.
Fig 4-32 network configuration-server