LT Security LTD2316ME - Manual (Page 38)

DVR User Manual
32
Step4: After clicking Area button, a dialog box will pop-up as Fig 4-24:
Fig 4-24 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value
is the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value
according to the practical conditions; click
icon, set the whole area as detection area; click icon, the set detection area
will be cleared; click icon, user can test whether the sensitivity value and motion area are suitable accordingly
（refer to
following picture
）; Click
icon, to save the setting; click icon, exit current interface.
Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area
firstly, and then make the operation.
Step6: user can setup all channels with same parameters.
Step7: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
② Schedule
Step1: enter into system configurationalarm configurationschedule; refer to Fig 4-25: