LT Security LTD2316ME - Manual (Page 31)

DVR User Manual
25
4.3.3 Time
Step1: enter into system configurationrecord configuration
time; refer to Fig 4-13:
Pre-alarm record time: the record time before event happen i.e.
record time before motion detection or sensor alarm is triggered.
Post-alarm record: set the post recording time after the alarm is
finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and
300s.
Expire time: the hold time of saved records. If the set date is
overdue, the record files will be deleted automatically.
Step2: user can setup all channels with same parameters, and
then tick off
“all” to do relevant setup. Fig 4-13 record configuration-time
Step3: click “default” to restore default setting; click “apply” to save the setting; click “exit” to exit current interface.
4.3.4 Stamp
Stamp
：User can overlap the channel name and time
stamp on video.
Step1:
enter into system configuration record
configuration stamp; refer to Fig 4-14:
Step2: tick off camera name, time stamp; click Setting
button. User can use cursor to drag the camera name and
time stamp in random positions, referring to below
Figures:
Step3: user can setup all channels with same parameters.
Tick off
“all” to do relevant setup.
Fig 4-14 record configuration-stamp