Limitations – LT Security LTN7732-P8 Platinum Web Guide User Manual
Page 28
http://www.
lts
ecurityinc.com/
28 |
P a g e
Limitations
Camera Initialization
No Channel Position Saving
Isolated IPC Web Client on Built-in PoE
Cannot Remotely Reset Password
Mac Web Client Is a Separate Download
One-Click camera initialization is from the NVR only. The SADP tool can be used to manually
find cameras and assign them IP#s. They can then be added from the web client.
Configuration > Remote Configuration > Camera Management > IP Camera
Cameras will be positioned in the order in which they are added. Those positions can be
changed manually, but not saved. The
itself needs to be changed for the camera
positions to be saved.
Cameras connected to the built-in PoE switch are isolated from the network. This reduces or
eliminates IPC bandwidth on the network, a potential issue. This also means the IPCs can only
be configured from the NVR itself or by
patching into the built-in PoE ports
firmware for the LTN7700 series can allow access through the NVR.)
Password resets (covered in the main Platinum Guide) can only be performed on the NVR itself.
They cannot be performed by any other means. They cannot be performed by with the web
client or other tools.
The Mac compatible version of the web client is not available from the NVR itself (the Windows
version is). The Mac version must be
(Mac web client current version is 3.x; Windows is 5.x)
Written by Ryan D. Lang