Firmware version/upgrade/downgrade . 18 – LT Security LTN7732-P8 Platinum Web Guide User Manual
Page 18
http://www.
lts
ecurityinc.com/
18 |
P a g e
Troubleshooting
If the test fails, check the information. If it is correct, check the
. If no address has been set to the DNS, set it to: 8.8.8.8
(Google’s DNS server).
Select Cameras
Once the e-mail sender account has been configured, each camera
must be told to send an e-mail alert. These settings are under:
Configuration > Camera Settings > Motion Detection > Linkage Method
Add a check mark to the “Send Email” settings.
Do this for each camera that needs an e-mail alert.
Snapshots are in D1 resolution.
Note: Please limit the area to the smallest possible size. All motion
will trigger an e-mail (passing cars, windblown trees, etc.).
Firmware Version/Upgrade/Downgrade
Firmware Version
Configuration > Device Parameters > Device Information
Firmware Upgrade
First, make note of the model of the NVR. It is always shown on top,
left of the web page:
Second, download the latest version of the firmware from the
page. Make sure to find your model number on
the page and extract the firmware from the .zip file.
Third, go to the Maintenance section of the web client:
Configuration > Maintenance