LT Security LTN7732-P8 Platinum Web Guide - Manual (Page 24)

http://www. lts ecurityinc.com/ Menu 24 | P a g e
Reboot/Restore/Default
Configuration > System > Maintenance
Reboot = Reboot the device.
Restore = Reset all the parameters, except the IP parameters and user
information, to the default settings.
Default = Restore all parameters to default settings.
Image & Audio Settings
Configuration > Image > Display Settings
Most of the settings of an IP camera can be accessed from the NVR
itself. Sometimes features are added to cameras that are not
immediately included in the NVR. (This is especially true if the IPC
firmware came out after the NVRs.) Those features can only be
accessed from the camera’s web client.
Note:
Different models and different firmware have different features!
+NVR = Available from the NVR directly.
-NVR = Not currently on the NVR.
+/-NVR = Some features are on the NVR, but typically aren’t needed.