Lincoln Electric IM698 PIPELINER 200G - Manual (Page 8)

DC CURRENT RANGE
Fine Adjustment in each Range
40-300 Amps
DUTY CYCLE
60%
60%
RATED DC OUTPUT*
VOLTS @ RATED AMPS
Lincoln Plus Rating
40V @ 200A
NEMA Rating
28V @ 200A
A-1 INSTALLATION
PIPELINER 200G
A-1
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
Make/Model Description Speed (RPM) Displacement Ignition Capacities
cu. in. (Ltrs.) System
High Idle 1600 Delco Voyager Fuel: 15 gal.
4 Cylinder High Energy 57 Ltrs.
GM 4 Cycle
3.0 Liter Full Load 1600 Distributor Type Oil: 4.5Qts.
Pipeliner 200G 183.0(3.0) Electronic 4.3 Ltrs.
(K6090-7) 46 HP @
1600 RPM
Low Idle 1360
INPUT - GASOLINE ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
40.94** in. 24.00 in. 68.16in.
1039.9 mm 609.6 mm 1731.0 mm 1295.0 lbs. (587kg.)
**Top of enclosure, add 4.6” (116.8mm) for exhaust
OUTPUT - GENERATOR
Auxiliary Power 1
1.75 kW, 15 Amps @ 120V DC
PHYSICAL DIMENSIONS
ENGINE OPERATING LOAD FUEL CONSUMPTION
Coolant: 9.9 Qts.
9.4 Lts.
TECHNICAL SPECIFICATIONS - Pipeliner 200G (K6090-7)
DESCRIPTION
200 Amp DC Welder
All Copper Windings
Pure DC Power
Generator
Low Idle (1360 RPM)-No Load
High Idle (1600 RPM)-No Load
DC Auxiliary-128 Volts-15 Amps-1600 RPM
50 Amps @ 38 Volts @ 60% Duty Cycle
100 Amps @ 34 Volts @ 60 % Duty Cycle
150 Amps @ 29 Volts @ 60% Duty Cycle
200 Amps @ 40 Volts @ 60 % Duty Cycle
.7 gal/hr (2.8 ltrs/hr)
.8 gal/hr (3.1 ltrs/hr)
1.1 gal/hr (4.0 ltrs/hr)
1.04 gal/hr (3.94 ltrs/hr)
1.12 gal/hr (4.25 ltrs/hr)
1.15 gal/hr (4.37 ltrs/hr)
1.34 gal/hr (5.07 ltrs/hr)