Using bios, Power management setup – Elitegroup 945GSED-I (V1.0) User Manual

Page 41

Using BIOS

Press to return to the main menu setting page.

Onboard 10/100M Boot ROM (Disabled)

Use this item to enable or disable the boot function using the onboard 10/100M LAN
Boot ROM.

Onboard GbE LAN (Enabled)

Use this item to enable or disable the OnBoard GbE LAN function.

Onboard GbE Boot ROM (Disabled)

Use this item to enable or disable the boot function using the onboard GbE LAN Boot
ROM.

USB Functions (Enabled)

Use this item to enable or disable the USB function.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.

Parallel Port Address (378)

Use this item to enable or disable the onboard Parallel port, and to assign a port
address.

Parallel Port Mode (Normal)

Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).

Parallel Port IRQ (IRQ7)

Use this item to assign IRQ to the parallel port.

Serial Port1/2/3/4/5/6/7/8 Address (3F8/2F8/3E8/2E8/2F0/2E0/2D8/2D0)

Use this item to enable or disable the onboard serial port, and to assign a port address.

Serial Port1/2/3/4/5/6/7/8 IRQ (4/3/4/3/11/10/11/10)

Use this item to assign IRQ to the serial port.

Power Management Setup

This page sets up some parameters for system power management operation.

Select the ACPI
state used for Sys-
tem Suspend.

Help Item

Power Management Setup

ACPI Suspend Type

S3 (STR)

PWRON After PWR-Fail

Power Off

Power On by Ring

Disabled

Resume By PCI/Lan PME

Disabled

Resume By USB (S3)

Disabled

Resume By PS2 KB (S3)

Disabled

Resume on RTC Alarm

Disabled

Options

: Move

F10: Save and Exit

+/-: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

mnkl

ESC: Exit