Elitegroup 945GSED-I (V1.0) - Manual (Page 39)

35
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
DVMT Mode Select DVMT Mode
DVMT/FIXED Memory 128MB
HPET Enabled
Boot Display Device CRT
Flat Panel Type Type2
Help Item
Options
Auto
400 MHz
533 MHz
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
DVMT/FIXED Memory (128MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
Press to return to the main menu setting page.
HPET (Enabled)
This item enables or disables HPET (High Performance Event Timer) support.
Boot Display Device (CRT)
This item is to set the system display device during boot up and the value may be
updated according to the setting of OS driver.
Flat Panel Type (Type2)
This item allows you to select the Flat Panel Type. The numbers in the options mean
the maximum resolution which the Panel can support.
: Move F10: Save and Exit +/-: Value Enter : Select
F9: Optimized Defaults F1:General Help
mnkl ESC: Exit