Elitegroup 945GSED-I (V1.0) - Manual (Page 36)

32
Using BIOS
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Press to return to the main menu setting page.
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Thermal Management Enabled
TM Status TM1
Limit CPUID MaxVal Disabled
Intel XD Bit Disabled
Intel EIST Enabled
Intel (R) HT Technology Enabled
Quick Power on Self Test Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Dev.
Hard Disk Drives Press Enter
CD/DVD Drives Press Enter
Boot Other Device Yes
Case Open Warning Disabled
Chassis Opened No
For the processor its
CPUIE belows 0F41h.
Help Item
f
f
: Move F10: Save and Exit +/-: Value Enter : Select
F9: Optimized Defaults F1:General Help
mnkl ESC: Exit
Thermal Management (Enabled)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status (TM1)
This item displays CPU Monitor status.
Limit CPUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit.
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel EIST (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
technology).
Intel (R) HT Technology (Enabled)
This item enables or disables Intel HT Technology support.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.