7 firmware update commands – Accusys eXpeRAID User Manual
Page 26
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 26 OF 27
3.3.7 Firmware Update Commands
3.3.7.1
Command Name
Command Description
UpdateSystemCode
Update system code for the active controller. The controller needs to be
restarted for the new system code to take effect.
Parameter 1
Parameter Description
File Path:
<[DIR]
File Path:
Specify an existing System Code image file(FileName) located in the
specified directory.
3.3.7.2
Command Name
Command Description
UpdateBootCode
Update boot code for the active controller. The controller needs to be
restarted for the new boot code to take effect.
Parameter 1
Parameter Description
File Path:
<[DIR]
File Path:
Specify an existing Boot Code image file(FileName) located in the
specified directory.
3.3.7.3
Command Name
Command Description
UpdateBIOSEFI
Update BIOS and EFI firmware for the active controller. The controller
needs to be restarted for the new BIOS/EFI to take effect.
Parameter 1
Parameter Description
File Path:
<[DIR]
File Path:
Specify an existing BIOS/EFI image file(FileName) located in the
specified directory.