Accusys eXpeRAID User Manual
Page 24
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 24 OF 27
3.3.6.4
Command Name
Command Description
SMARTPollingPeriod
Use this command to set the polling frequency of SMART pre-failure
warning mode.
Parameter 1
Parameter Description
Polling Time:
<1Min:15Min:30Min:
60Min:2Hr:4Hr:8Hr>
Polling Time:
Set Polling Time as the SMART polling period.
3.3.6.5
Command Name
Command Description
BeeperMode
Use this command to enable or disable the controller beeper.
Parameter 1
Parameter Description
Enable/Disable controller beeper.
3.3.6.6
Command Name
Command Description
EQMode
Use this command to enable or disable Equalization Mode.
Parameter 1
Parameter Description
/
Disable Equalization Mode.
3.3.6.7
Command Name
Command Description
CtrlCache
Use this command to enable or disable controller cache.
Parameter 1
Parameter Description
Enable/Disable controller cache.
3.3.6.8
Command Name
Command Description
SyncCacheMode
Use this command to enable or disable Synchronize Cache mode.
Parameter 1
Parameter Description