6 miscellaneous commands – Accusys eXpeRAID User Manual
Page 23
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 23 OF 27
3.3.5.6
Command Name
Command Description
CancelSplitSchedule
Use this command to cancel split schedule for the specified mirror
snapshot.
Parameter 1
Parameter Description
Shot No.:
<1~8>
Shot No.:
Specify an existing mirror snapshot to cancel schedule.
3.3.6 Miscellaneous Commands
3.3.6.1
Command Name
Command Description
DiskLagProof
Use this command to enable or disable Disk Lag Proof mode. This
mode is only effective on RAID Level 5.
Parameter 1
Parameter Description
Enable / Disable Disk Lag Proof mode.
3.3.6.2
Command Name
Command Description
NCQMode
Use this command to enable or disable NCQ(native command queue)
mode.
Parameter 1
Parameter Description
3.3.6.3
Command Name
Command Description
SMARTMode
Use this command to enable or disable SMART pre-failure warning
mode.
Parameter 1
Parameter Description
Enable / Disable SMART pre-failure warning mode.