Accusys eXpeRAID User Manual
Page 25
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 25 OF 27
3.3.6.9
Command Name
Command Description
PrefetchNumber
Use this command to assign the maximum pre-fetch number.
Parameter 1
Parameter Description
Pre-fetch Number:
<1:2:4:8:16:32:64:128>
Pre-fetch Number:
The basic unit of maximum pre-fetch number is one stripe. For
example, if the maximum pre-fetch number is 8 and the stripe size is
128KB, then the maximum pre-fetch size is 8x128KB.
3.3.6.10
Command Name
Command Description
DriveCacheMode
Use this command to enable or disable drive cache(s).
Parameter 1
Parameter Description
Drive No.:
Parameter 2
Switch setting:
Drive No.:
Specify a drive or all drives to enable or disable cache.
<1~n>, where n stands for maximum existing drive number.
Drive=All, the command will have effect on all existing drives.
Switch setting:
Enable or disable the cache(s) on the specified drive(s).
3.3.6.11
Command Name
Command Description
CtrlTime
Use this command to set controller time.
Parameter 1
Parameter Description
Year:
Parameter 2
Month:
Parameter 3
Day:
Parameter 5
Hour:
Parameter 6
Minute:
Parameter 7
Second:
Year:
Year=xx means year 20xx.