Accusys eXpeRAID User Manual
Page 18
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE 18 OF 27
3.3.3.6
Command Name
Command Description
SetLunMap
Use this command to set a Lun Map for an existing slice or JBOD.
Parameter 1
Parameter Description
LUN No.:
Parameter 2
Array No.:
JBOD= <1~n>>
Parameter 3
LUN No.:
Specify the Lun number to be mapped.
Array No.:
Array =1~4, Maps Lun to a specified Array
JBOD=1~n, Maps Lun to a specified JBOD
Slice No.:
This parameter is not needed when parameter 2 uses JBOD.
Example
CLI>SetLunMap Lun=0 JBOD=1 [Enter]
Lun 0 will be mapped to JBOD1 if it exists.
Slice No.:
CLI>SetLunMap Lun=0 Array=1 Slice=0 [Enter]
Lun 0 will be mapped to slice 0 of array 1 if it exists.
3.3.3.7
Command Name
Command Description
DeleteLunMap
Use this command to delete an existing Lun Map.
Parameter 1
Parameter Description
LUN No.:
<0~63>
Lun No.:
Specify the Lun number to be unmapped.