Elitegroup G410 - Manual (Page 50)

42
7.
After all the all the information are correctly entered in the
“Internet Protocol (TCP/IP) Properties” window, click “OK” to
finish.
U SING B OTH DHCP AND S TATIC IP FOR C ONNECTION TO
I NTERNET
When you are alternatively using networks with either DHCP or
static IP addressing, you can use alternative settings that enable
simultaneous configurations of DHCP and static IP to use both of
the network connects without reconfiguring.
1.
Follow the steps mentioned when you are using wired LAN
connection from 1 to 7.
2.
Click on the “User configured” and enter the appropriate
values in the “Alternate Configuration” tab.