Elitegroup G410 - Manual (Page 29)

21
Inserting and Removing the Battery Pack
The battery pack should already be inserted in your Notebook
computer when you unpack it. If not inserted, follow these
directions:
1.
Turn over the notebook with the front of the unit facing you
and place it on a solid, flat surface.
2. Angle the battery into the bay. The front edge of the battery
should slide into the grooves in the system case.
3. Gently lower the battery into the bay and push it until it clicks
securely in the bay.
To remove the battery pack:
1.
Turn off the notebook, and disconnect the AC adapter. Close
the LCD panel and turn it over and place it on a solid, flat
surface.
2.
Lift the release latch to release the battery from the bay. At
this time the battery will now be angled slightly out of the bay.