Elitegroup A980 User Manual
Page 97
85
Solution:
The problem is beyond the scope of this manual. Contact technical support.
Problem:
An unidentified message is displayed.
Solution:
Reboot the computer and run the BIOS system setup. Confirm the Setup parameters.
If the same message is displayed after booting up again, contact technical support for
assistance.
Problem:
The system cannot access the CD-ROM/DVD-ROM drive.
Solution:
Check that a CD is properly inserted in the drive. Make sure that you are using the
correct program for that kind of CD. For example, the system cannot read a data CD
using an audio program.
Problem:
You cannot operate the printer.
Solution:
Check the printer cable connection. Ensure that the printer power switch is turned on.
Confirm that the printer is on-line.
Problem:
You can’t save data to disk.
Solution:
Ensure that the disk has been formatted.
Consult your operating system manual for information on formatting floppy diskettes.
Problem:
The diskette is write-protected.
Solution:
Eject the diskette, remove the write protection, and try again.
Problem:
The diskette if full.