Elitegroup A980 - Manual (Page 67)

55
Ø The settings are Disabled, Primary, Secondary or Both.
Auto-Detect Hard Disk
When Auto-Detect Hard Disk is selected, the BIOS will automatically detect Pri Master and Sec
Master Settings.
Change User Password
This field will show Set when you have set a User password as described below. If you have not
set the User Password, the field will show Clear. This is a display only field.
Change Supervisor Password
This field allows you to set the Supervisor password. To set the Supervisor password, highlight
this field and press the [Enter] key. The following dialog box appears:
Enter new supervisor password:
Auto Configuration with Optimal Settings
The optimal default settings are best-case values that should optimize system performance. To
set the configuration, highlight this field and press the [Enter] key. The following dialog box
appears:
Load high performance settings [Y/N] ?