Elitegroup 557 User Manual

Page 50

After all the all the information are correctly entered in the “Internet Protocol (TCP/IP)
Properties” window, click “OK” to finish.

Using Both DHCP and Static IP for Connection to Internet

When you are alternatively using networks with either DHCP or static IP addressing, you can use
alternative settings that enable simultaneous configurations of DHCP and static IP to use both of
the network connects without reconfiguring.
1.

Follow the steps mentioned when you are using wired LAN connection from 1 to 7.
Click on the “User configured” and enter the appropriate values in the “Alternate Configuration”
tab.

When you have completed the entire configuration, click “OK”.

Using Wireless LAN Network for Connection to Internet

From Start, click on the "My Network Places" icon and click the "View Network Connection".
Select the “Wireless Network Connection” item from the “Network Connections” display
window.

From the “Wireless Network Connection Status” display window, click on the “Properties”