Elitegroup 557 - Manual (Page 20)

Getting to Know Your Computer
Opening the LCD Panel
At the front of the Notebook you will find a retaining latch on the display panel that locks the
display in closed position when the Notebook is not in use.
Slide the display panel latch to the right until the display panel releases, and then raise the
LCD screen.
At any time you can tilt the display toward or away from you to a comfortable viewing
position.
Press on the Power button to start your computer.
To avoid damage to the display panel:
1. Try not to slam the display upon closing it.
2. Try not to place any object on top when it is closed or open.
3. Be sure the system is turned off or in suspend mode before you close the display
panel.
To shutdown the system in non-Windows (DOS mode, System POST, Setup Menu or
Quick Boot Menu) based environment, enable the lid switch. This will prevent the system
from damaged if it exceeds the temperature limit. Windows will control the lid switch in
windows environment.
10