Elitegroup H87H3-TI (V1.0) - Manual (Page 58)

Chapter 3
H87H3-TI USER MANUAL
54
This page enables you to set the keyboard NumLock state.
Boot Menu
Main Advanced Chipset Tweak Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Windows 7 or other OS:
Boot policy for Legacy OS.
Windows 8: Boot policy for
UEFI OS without
Compatibility Support
Module (CSM).
Manual: User customized
CSM parameters & Boot
policy.
Boot Configuration
This item shows the information of the Boot Configuration.
Operation System Select (Windows 7 or other OS)
This item is used to select the operation system.
Launch PXE OpROM (Disabled)
The item enables or disables launch PXE Option ROM.
Launch Storage OpROM (Enabled)
Use this item to enable or disable the Storage OpROM.
Fast Boot (Disabled)
This item enables or disables boot with initialization of a minimal set of device
required to launch active boot option. Has no effect for BBS boot options.
Bootup NumLock State (On)
This item enables you to select NumLock state.
Boot mode select (LEGACY)
Use this item to select boot mode.
Boot Option #1 /2 /3 /4 /5 /6 /7
Use these items to set the system boot order.
Hard Hard Disk Drive Priorities
This item enables you to specify the sequence of loading the operating system. Press
to see the submenu.
Boot Configuration
Operation System Select Windows 7 or other OS
Launch PXE OpROM Disabled
Launch Storage OpROM Enabled
Fast Boot Disabled
Bootup NumLock State On
Boot mode select LEGACY
Set Boot Priority
Boot Option #1
Hard Disk
Boot Option #2 CD/DVD
Boot Option #3 USB/Floppy
Boot Option #4 USB CD/DVD
Boot Option #5 USB Hard Disk: Gener i...
Boot Option #6 USB Flash
Boot Option #7 Network
USB Hard Disk Drive Priorities