Elitegroup H87H3-TI (V1.0) - Manual (Page 57)

Chapter 3
H87H3-TI USER MANUAL
53
When end-users encounter failure after attempting over-clocking, please take the
following steps to recover from it.
1. Shut down the computer.
2. Press and hold the “Page Up Key (PgUp)” of the keyboard, and then boot the PC
up.
3. Two seconds after the PC boots up, release the “Page Up Key (PgUp)”.
4. The BIOS returns to the default setting by itself.
Fail-Safe Procedures for Over-clocking
Warning:
Over-clocking components can adversely affect the reliability of the system
and introduce errors into your system. Over-clocking can permanently
damage the motherboard by generating excess heat in components that are
run beyond the rated limits.
Total Memory (2048 MB (DDR3))
This item shows the total memory.
Processor Speed (2800 MHz)
This item shows the current processor speed.
Genuine Intel(R) CPU 0000 @ 2.80GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Memory Frequency (1067 Mhz)
This item shows the memory frequency.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.