DataComm 45-0071 Recessed Low Voltage Mid-Size Plate with Duplex Receptacle - Manual

Use DataComm Electronics’ Recessed Low Voltage Mid-Size Plate with Duplex Receptacle to install low voltage cables behind your flat panel
TV, your amplifier or other audio and video devices. This mid-size plate can be installed upright, sideways (see Figures 1 & 2).
Features of the 45-0071 Recessed Low Voltage Mid-Size Plate with Duplex Receptacle include:
 Compact size fits behind small and large TV’s
 TV plug recesses completely into the wall
 Duplex receptacle for additional devices
 Low voltage flexible screen cover conceals opening in the low voltage portion of the wall plate
IMPORTANT INSTRUCTIONS:
This product is designed for retrofit work only because the electrical outlet box cannot be attached to a stud.
WARNING:
Before you run your 12/2 or 14/2 w/ground UL approved building to the Recessed Low Voltage Mid-Size Plate with Duplex
Receptacle, be sure the power is off by switching the circuit breaker to off or removing the fuse(s). Test the power to make sure the
power is off. Be sure to install the Mid-Size Plate with Duplex Receptacle in accordance with the National Electrical Code (NEC) and
local codes.
DataComm Electronics, Inc.
6349 Peachtree Street
Norcross, GA 30071-1725
888.223.7977
770.662.8205
www.datacommelectronics.com
Instruction / Installation Sheet
DataComm Electronics 45-0071 Recessed Low Voltage Mid-Size Plate with Duplex Receptacle
Parts Included:
1.
45-0071 Recessed Low Voltage Mid-Size Plate
2. Electrical Outlet Box
3. 15 Amp/125 Volt Tamper Resistant Duplex Receptacle
4. Four (4) Screws
Tools Needed:
1. Drywall
Saw
2. 6 Ft. Tape Measure
3. Pencil
4. Screwdriver
Figure 1 – Front View Figure 2 – Back View
Page 1 of 3 9/21/12