Brocade Network Advisor Installation and Migration Guide (Supporting Network Advisor 12.3.0) - Manual (Page 44)

24 Brocade Network Advisor Installation and Migration Guide
53-1003157-01
Accessing the Network Advisor interfaces
2
Launching the SMC on Windows
Open the Server Management Console from the Start menu on the Network Advisor server.
You can also drag the SMC icon onto your desktop as a short cut.
Launching the SMC on Linux
NOTE
The Server Management Console is a graphical user interface and should be launched from the
XConsole on Linux systems.
Double-click the SMC icon on your desktop.
OR
1. On the Network Advisor server, go to the following directory:
Install_Directory/bin
2. Type the following at the command line:
./smc
OR
sh smc
Launching the SMIA Configuration Tool
1. Launch the Server Management Console from the Start menu.
2. Click Configure SMI Agent.
The SMIA Configuration Tool Log In dialog box displays.
3. Enter your user name and password.
The defaults are Administrator and password, respectively.
4. Click Login.
Launching the SMIA Configuration Tool remote client
The remote client requires Oracle JRE 1.7.0_60. For the website listing patch information, go to
http://www.oracle.com/technetwork/java/javase/downloads/index.html.
1. Open a web browser and enter the IP address of the Network Advisor server in the Address bar.
If the web server port number does not use the default, you must enter the web server port
number in addition to the IP address; for example, IP_Address:Port_Number.
The default port number for the Network Advisor web server is 443 if SSL is enabled;
otherwise, the default is 80.
The Network Advisor web start screen displays.
2. Click the SMIA Configuration Tool web start link.
The SMIA Configuration Tool Log In dialog box displays.