Brocade Network Advisor Installation and Migration Guide (Supporting Network Advisor 12.3.0) - Manual (Page 42)

22 Brocade Network Advisor Installation and Migration Guide
53-1003157-01
Accessing the Network Advisor interfaces
2
Accessing the Network Advisor interfaces
Use the following procedures to access Network Advisor from the server and client as well as to
access the Server Management Console and the SMI Agent Configuration Tool.
Logging into a server
You must log into a server to monitor your network.
NOTE
You must have an established user account on the server to log in.
1. Double-click the desktop icon or open the application from the Start menu.
The Log In dialog box displays.
2. Log into another server by entering the IP address to the other server in the Network Address
field.
NOTE
The server must be the exact same version, edition, starting port number, and network size as
the client.
NOTE
You can remove a server from the Network Address list by selecting the IP address and clicking
Delete.
3. Enter your user name and password.
The defaults are Administrator and password, respectively.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
4. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.
5. Click Login.
6. Click OK on the Login Banner dialog box.
The Network Advisor application displays.