beautypg.com

Verifying the installation – Brocade Mobility RFS7000 Controller Installation Guide User Manual

Page 32

background image

Verifying the installation

4

24

Brocade Mobility RFS7000 Controller Installation Guide

53-1001574-03

Verifying the installation

View the LEDs on the front panel of the Mobility RFS7000 Controller to ensure the
device is functioning properly. The normal LED pattern follows this path:

During the Power On Self Test (POST), the System 1 and System 2 LEDs both
blink green.

If the POST test fails, the System 1 LED will blink amber. If the POST test
succeeds, the System 1 LED will be lit solid green.

As the software is initialized, the System 2 LED will blink green.

After the software has finished initializing, the System 1 LED will be lit solid
green and the bottom System 2 LED will be off. The Mobility RFS7000
Controller is ready to be configured, as described in the Mobility RFS7000
Controller System Reference Guide.

Other LED codes indicate the presence (or absence) of different standby states, or
errors. A guide to the Mobility RFS7000 Controller LEDs codes is provided in

“LED

Codes”

on page 7.