Brocade Mobility RFS7000 Controller Installation Guide - Manual (Page 24)

Cabling information
4
16 Brocade Mobility RFS7000 Controller Installation Guide
53-1001574-03
Cabling information
The Mobility RFS7000 Controller has four RJ-45 Gigabit Ethernet ports, four Gigabit
SFP (fiber) ports, one Out-of-band management port and one Console connector.
The diagram shows each of those ports and the cables or devices attached to
them. The sections that follow describe detailed connection and cabling
information for each port. For software configuration, please see the Mobility
RFS7000 Controller System Reference Guide available from the Brocade website.
Gigabit Ethernet on the Mobility RFS7000 Controller
The Mobility RFS7000 Controller has four RJ-45 Gigabit Ethernet ports and four
Gigabit SFP (fiber optic) ports. Using the RJ-45 ports requires connecting a
Category-6 Ethernet cable to the port. To use the Gigabit SFP ports, first install the
SFP modules (Part No. FIBER-3000-1S-WWR).
sym_005
Out-of-Band
Management
Gigabit
SFP
Port 1
Gigabit
Ethernet
Port 1
Console
Compact Flash USB 1
USB 2 Gigabit
Ethernet
Port 2
Gigabit
SFP
Port 2
Gigabit
SFP
Port 3
Gigabit
SFP
Port 4
Gigabit
Ethernet
Port 3
Gigabit
Ethernet
Port 4