beautypg.com

Connecting usb devices – Brocade Mobility RFS7000 Controller Installation Guide User Manual

Page 27

background image

Connecting USB devices

4

Brocade Mobility RFS7000 Controller Installation Guide

19

53-1001574-03

Connecting USB devices

The Mobility RFS7000 Controller contains two USB ports for connecting USB flash
storage devices to the switch. The switch can use the USB flash storage devices for
file transfers and firmware updates. Follow the setup instructions below to connect
the devices to the switch and then access those devices through the Web UI or
Command Line Interface.

1. Connect the USB flash drive to either of the USB ports.

2. Wait a few seconds for the drive to be recognized by the switch.

3. Follow the instructions in the Mobility RFS7000 Controller System Reference

Guide or Mobility RFS7000 Controller CLI Reference for more information on
accessing USB storage devices from the switch for file transfers or firmware
updates.

USB

ports