Brocade Mobility RFS7000 Controller Installation Guide - Manual (Page 16)

System status LEDs
3
8 Brocade Mobility RFS7000 Controller Installation Guide
53-1001574-03
Start up / post (primary system or redundant system)
NOTE
During switch start up, the Temperature status LED will be lit Solid Amber. This is
normal behavior and does not indicate an error. At the completion of start up the
Temperature Status LED will switch to Solid Green.
Switch status (primary system)
System status 1 LED System status 2 LED Event
Off Off Power off
Green blinking Green Blinking Power On Self Test (POST) running
Green solid Green Blinking POST succeeded (Operating System
Loading)
Green solid Off POST succeeded (Normal Operation)
Amber blinking Off POST Failure
Alternating green blinking
& amber blinking Alternating Green Blinking
& Amber Blinking Boot Up Error: Device has an invalid
checksum
System status 1 LED System status 2 LED Event
Off Off Power off
Green solid Off No Redundancy Feature Enabled
Green solid Green solid Redundancy Feature Enabled
Actively Adopting Access Points
Green solid Amber blinking No License to adopt Access Points or No
Country Code configured on the switch.