Brocade Mobility RFS9510 Controller Installation Guide - Manual (Page 16)

12 Brocade Mobility RFS9510 Controller Installation Guide
53-1002918-01
Hardware installation
3
LED functionality for the PCIe cards is listed in the following table:
LED functionality for the Hardware Cryptography Engine is listed in the following table:
Power supply status LED
Each power supply module has a single bi-color LED to indicate power supply status. The LED is
visible on the rear panel of each installed power supply.
The LED functionality for the power supply is listed in the following table:
LED Color State Description
DC Indicator Green/Red Green On/Red Off
Green Off/Red On Normal function
Power fault
Color State Description
- Off No AC power to all power supplies
Amber Solid No power to this power supply only (for 1+1 configuration) or a
power supply critical event has caused a shutdown (power
supply failure, blown fuse (1+1 only), over voltage condition,
under voltage condition, fan failed)
Amber 1Hz Blink Power supply warning events where the power supply
continues to operate (high temperature, high power, high
current, slow fan speed)
Green 1Hz Blink AC present, only 5 VSB on (PS off)
Green Solid Output on and normal operation