Brocade Converged 10GbE Switch Module for IBM BladeCenter IBM BladeCenter at-a-glance guide - Manual (Page 9)

Brocade Converged 10GbE Switch Module for IBM BladeCenter 9
The front panel contains the following components:
LEDs that display the following information: 
The status of the switch module and its network connection 
The status of the external connections to the switch module 
Eight FC SFP+ port connectors to attach SFP+ modules. They are numbered 23-30 right to left. 
Eight FCoE/CEE SFP+ port connectors to attach SFP+ modules. They are numbered 15-22 right to 
left.
One RJ-45 Ethernet port connector for debug and field support. 
One mini-USB console port connector used for switch management. This port requires a mini-USB 
plug on the serial cable.
Network cabling requirements
The following network cables are supported for the Brocade Converged 10GbE Switch Module:
10GBASE-SR for 10Gb CEE ports 
850 Nm wavelength, multimode fiber, 50 µ or 62.5 µ (300 meters maximum), with LC duplex

connector
8 Gb FC ports when operating at 8 Gbps speed 
850 Nm wavelength, multimode fiber, 50 µ (150 meters maximum) or 62.5 µ (21 meters 
maximum), with LC duplex connector
1000BASE-T for RJ-45 port 
UTP Category 6 (100 meters maximum) 
UTP Category 5e (100 meters maximum) 
UTP Category 5 (100 meters maximum) 
EIA/TIA-568B 100-ohm STP (100 meters maximum) 
Operating environment
The switch module has the following physical specifications:
Dimensions: 
Approximate height: 4.10 cm (1.61 inches) 
Approximate width: 29.38 cm (11.57 inches) 
Approximate depth: 25.70 cm (10.12 inches) 
Approximate weight: 2.13 kg (4.7 lb)

Operating: 
0° to 40° C (32° to 104° F) at 0 to 3,048 m (0 to 10,000 ft) operating 
Non-operating:

-20° to 70° C (-4°F to 158° F) at 0 to 10,688 km (0 to 35,000 ft) non-operating 
Humidity:

10% to 90% (non-condensing) at 29° C operating 
5% to 95% (non-condensing) at 38° C non-operating 