Brocade Converged 10GbE Switch Module for IBM BladeCenter IBM BladeCenter at-a-glance guide User Manual
Page 6
Brocade Converged 10GbE Switch Module for IBM BladeCenter
6
The Brocade Converged 10GbE Switch Module supports the expansion cards listed in Table 3. This table
also lists the chassis bays in which the switch module must be installed when used with each expansion
card.
Table 3. Brocade Converged 10GbE Switch Module and BladeCenter chassis I/O bays support
Description
Part
number
Gigabit Ethernet integrated in the server
None
N
N
N
N
N
N
N
N
N
N
Ethernet Expansion Card (CFFv)
39Y9310
N
N
N
N
N
N
N
N
N
N
Ethernet Expansion Card (CIOv)
44W4475
N
N
N
N
N
N
N
N
N
N
QLogic Ethernet and 4Gb FC Card (CFFh)
39Y9306
N
N
N
N
N
N
N
N
N
N
2/4 Port Ethernet Expansion Card (CFFh)
44W4479
N
N
N
N
N
N
N
N
N
N
QLogic Ethernet and 8Gb FC Card (CFFh)
44X1940
N
N
N
N
N
N
N
N
N
N
NetXen 10Gb Ethernet Expansion Card (CFFh)
39Y9271
N
N
N
N
N
N
N
N
N
N
Broadcom 2-port 10Gb Ethernet Expansion Card
(CFFh)
44W4466
N
N
N
N
N
N
N
N
N
N
Broadcom 4-port 10Gb Ethernet Expansion Card
(CFFh)
44W4465
N
N
N
N
N
N
N
N
N
N
QLogic 2-port 10Gb Converged Network Adapter
(CFFh)
42C1830
N
N
N
N
N
N
Y
N*
Y
N*
Emulex Virtual Fabric Adapter (CFFh)
49Y4245
N
N
N
N
N
N
N
N
N
N
Intel 2-port 10Gb Ethernet Expansion Card (CFFh)
42C1810
N
N
N
N
N
N
N
N
N
N
Brocade 2-port 10GbE Converged Network Adapter
81Y1650
N
N
N
N
N
N
Y
N*
Y
N*
* One Brocade Converged 10GbE Switch Module occupies two adjacent high-speed bays, and the ports
on supported cards are physically routed to the bays 7 and 9.
The BladeCenter chassis have the following bays:
BladeCenter S, E, and T have four standard I/O bays (1, 2, 3, and 4)
BladeCenter H has four standard I/O bays (1, 2, 3, and 4), two bridge bays (5 and 6), and four
high-speed bays (7, 8, 9, and 10)
BladeCenter HT has four standard I/O bays (1, 2, 3, and 4) and four high-speed bays (7, 8, 9, and 10)
The Brocade Converged 10GbE Switch Module fits in one of the high-speed I/O bay (bays 7-10).