Brocade Converged 10GbE Switch Module for IBM BladeCenter IBM BladeCenter at-a-glance guide - Manual (Page 2)

Brocade Converged 10GbE Switch Module for IBM BladeCenter 2
Part number information
Table 1 lists the part numbers to order these modules and additional options for them.
Table 1. IBM part numbers and feature codes for ordering
Description IBM part number IBM feature code
Brocade Converged 10GbE Switch Module for IBM BladeCenter 69Y1909 7656
Brocade 10Gb SFP+ SR Optical Transceiver 49Y4216 0069
Brocade 8Gb SFP+ SW Optical Transceiver 44X1962 5084
Brocade 14-port Converged 10GbE Switch Port Upgrade 69Y1917 2425
Brocade ISL Trunking software upgrade 26K5607 4247
Brocade Fabric Watch software upgrade 45W0504 4398
Brocade Performance Monitor upgrade 45W0508 4248
Part number 69Y1909 include the following items:
One Brocade Converged 10GbE Switch Module for IBM BladeCenter (includes two 10GbE SFP+ 
modules standard)
IBM Important Notices document 
IBM Warranty and Support Guide 
One mini-USB console cable with serial connectors 
BC-HT interposer gasket kit (used if the switch module is inserted in the BladeCenter HT chassis) 
DB9 to RJ45 adapter 
The IBM Documentation CD which contains the following documents: 
Brocade Converged 10GbE Switch Module for IBM BladeCenter Installation and Users Guide

IBM Safety Information document (multilingual) 
IBM Environmental Notices and Users Guide

Brocade EULA 
Brocade CEE Admin guide 
Brocade CEE CLI guide 
Brocade MIBS manual 
The base model of the Brocade Converged 10GbE Switch Module, 69Y1909, ships with 16 licensed
ports. This module supports the Dynamic Ports on Demand (DPOD) feature, where ports are licensed as
they come online independent of the port type. In the base model, two external CEE ports (ports 15 and
16) are pre-licensed and are pre-installed with two 10GbE optical transceivers. The remaining 14 licenses
are available to be assigned to other internal or external ports. The 16 licensed ports may be any
combination of external CEE ports, external FC ports, or internal CEE ports. After all the licenses have
been assigned, you can manually move licenses from one port to another.
Additional ports can be activated by purchasing the Brocade Converged 10GbE Switch Port Upgrade,
part number 69Y1917. This upgrade option activates the license for the remaining 14 ports. All internal
and external ports will then be licensed and can be used.
The switch ships standard with two small form-factor pluggable plus (SFP+) modules. Additional SFP+
transceivers can be ordered separately if required. Table 1 lists the transceivers that are supported.