About this document, In this chapter, Audience – Brocade 6910 Ethernet Access Switch Hardware Installation Guide User Manual
Page 13: Supported hardware and software, Document conventions, Text formatting
Brocade 6910 Ethernet Access Switch Hardware Installation Guide
xiii
53-1002650-02
About This Document
In this chapter
•
•
•
•
•
•
Getting technical help or reporting errors . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and
Layer 3 switching and routing.
If you are using a Brocade Layer 3 Switch, you should be familiar with the following protocols if
applicable to your network: IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, and VRRP.
Supported hardware and software
This guide describes software release 2.2.0.x of the Brocade 6910 Ethernet Access Switch.
Document conventions
This section describes text formatting conventions and important notice formats used in this
document.
Text formatting
The narrative-text formatting conventions that are used are as follows: