Ip configuration – Brocade FastIron Ethernet Switch Feature and RFC Support Matrix User Manual

Page 32

IP configuration

Documents software features supporting IP configuration.

The following features are documented in the FastIron Ethernet Switch Layer 3 Routing Configuration
Guide.

Feature

ICX 6430

ICX 6450

FCX

ICX 6610

ICX 6650

FSX 800
FSX 1600

ICX 7750

ARP Packet Validation

08.0.10a

BootP/DHCP relay

08.0.01

08.0.10

Specifying which IP address will be
included in a DHCP/BootP reply packet

08.0.01

08.0.10

DHCP Server

08.0.01

08.0.10

DHCP Client-Based Auto-Configuration

08.0.01

08.0.10

DHCP Client-Based Flash image Auto-
update

08.0.01

08.0.10

DHCP assist

08.0.01

08.0.10

Equal Cost Multi-Path (ECMP) load
sharing

08.0.01

08.0.10

IP helper

08.0.01

08.0.10

Single source address for the following
packet types: Telnet, TFTP, Syslog,
NTP, TACACS TACACS+, RADIUS,
SSH, SNMP

08.0.01

08.0.10

IPv4 point-to-point GRE IP tunnels

08.0.01

08.0.10

GRE tunnel counters enhancement

08.0.01

08.0.10

Routing for directly connected IP
subnets

08.0.01

08.0.10

Virtual Interfaces: Up to 512 virtual
interfaces

08.0.01

08.0.10

31-bit subnet mask on point-to-point
networks

08.0.01

08.0.10

Address Resolution Protocol (ARP)

08.0.01

08.0.10

Reverse Address Resolution Protocol
(RARP)

08.0.01

08.0.10

IP follow

08.0.01

08.0.10

Proxy ARP

08.0.01

08.0.10

Local proxy ARP

08.0.01

08.0.10

Supported on ICX 6450 Compact devices. For others, supported in a mixed stack only.

Up to 255 virtual interfaces.

IP configuration

FastIron Ethernet Switch Feature and RFC Support Matrix

53-1003078-04