Brocade FastIron Ethernet Switch Feature and RFC Support Matrix - Manual (Page 29)

Layer 3 Routing Features
● Layer 3 routing protocols ................................................................................................29
● Border Gateway Protocol version 4 (BGP4)................................................................... 30
● Border Gateway Protocol version 4 plus (BGP4+)..........................................................31
● IP configuration............................................................................................................... 32
● IPv6 configuration .......................................................................................................... 33
● Open Shortest Path First (OSPF) Protocol Version 2..................................................... 34
● Open Shortest Path First (OSPF) Protocol Version 3..................................................... 35
● Routing Information Protocol (RIP)................................................................................. 36
● Routing Information Protocol Next Generation (RIPng) ................................................. 37
● Virtual Router Redundancy Protocol (VRRP) and Virtual Router Redundancy
Protocol Extended (VRRP-E)....................................................................................... 37
● Multi-VRF........................................................................................................................ 38
Layer 3 routing protocols
Documents software features supporting Layer 3 routing protocols.
The following features are documented in the FastIron Ethernet Switch Layer 3 Routing Configuration
Guide.
Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600 ICX 7750
Static IP routing No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Layer 3 system parameter limits No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Static ARP entries No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Configurable ARP priority No 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.10
RIP V1 and V2 (Static RIP support only
in the base Layer 3 image. The Brocade
device with base Layer 3 does not learn
RIP routes from other Layer 3 devices.
However, the device does advertise
directly connected routes.) No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Redistribution of IP static routes into RIP No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
RIP default route learning No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Route loop prevention: Split horizon,
Poison reverse No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Route-only support (Base Layer 3 with
Router image and Full licensed router
image) No 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
FastIron Ethernet Switch Feature and RFC Support Matrix 29
53-1003078-04