Brocade FastIron Ethernet Switch Feature and RFC Support Matrix - Manual (Page 12)

Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600 ICX 7750
Diagnostic error codes and remedies for
TFTP transfers 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
IPv4 ping 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
IPv4 traceroute 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Layer 3 hitless route purge No 08.0.01 08.0.01 08.0.01 No 08.0.01 4 No
Power over Ethernet (PoE)
Documents software features supporting PoE.
The following features are documented in the FastIron Ethernet Switch Administration Guide.
NOTE
The ICX 6450-C switch running software version 08.0.10 supports PoE pass-through in both the AC
and Powered Device (PD) power modes.
Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600 ICX 7750
PoE+ (802.3at) 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 5 No
PoE (802.3af) 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
Detection of PoE power requirements
advertised through CDP 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
Maximum power level for a PoE power-
consuming device for LLDP-MED or
CDP 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
Power class for PoE power-consuming
device 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
Maximum power budget per PoE
interface module No No No No No 08.0.01 No
In-line power priority for a PoE port 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
PoE firmware upgrade via CLI 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
PoE firmware version update 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
PoE firmware download over SCP 08.0.01 08.0.01 08.0.01 08.0.01 No No No
PoE support on LAGs 08.0.01 08.0.01 08.0.01 08.0.01 No 08.0.01 No
4 3rd generation modules.
5 SX-FI48GPP and SX-FI24GPP modules.
Power over Ethernet (PoE)
12 FastIron Ethernet Switch Feature and RFC Support Matrix
53-1003078-04