Anthro Zido Adjustable-Height Cart Assembly Instructions - Manual (Page 3)

Zido Height-adjustable Carts Assembly Instructions 3
STEP 1A
Connect the Base with the Tube
¡ Holding the column from the center (don't push from
the top) slide the tube into the base so that the tube
goes all the way to the bottom of the base.
¡ Align the upper hole on the base with a threaded
hole in the column. (For the large cart, you'll use
the top hole; for the small cart, you'll use the second
hole.) Loosely attach the column to the base with
two 3/4" Flat-head Screw.
STEP 1B
Insert the Casters
¡ Place Zido on its side. Add the locking casters
(the ones with the brakes) to the front of the
base assembly. Add the non-locking casters
to the back of the base assembly.
ASSEMBLY SEQUENCE
Plan out the assembly sequence to make your installation easier.
1. Pre-drill the top for accessories (Mouse Holder, Side Bin, Gel Cup/Probe Holder, Extension Tube).
2. Assemble the cart.
3. Base Storage Shelf.
4. Drawer, Keyboard Drawer, Handle.
5. SideRacks, Additional Shelves, Equipment Shelves, Metal Bin, SideRack.
6. Cable Bin, Glove Box Holder, Tank Holder.
7. Mouse Holder, Side Bin, Gel Cup
& Probe Holder, Extension Tube.
8. Pole Cart Handle, 8" Handle, Flat Panel Mounts.
3/4" Flat Hd Screw
325-5466-00