Anthro ShopAbout Original Assembly Instructions - Manual

Assembly instructions
Anthro Corporation ® | 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: [email protected] | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
ShopAbout
™
Original
& Tall
Bag Holders
March 2010
Part Numbers: CWNB4832SM/BF5, CWPB4832SM/BF5, CWBT4832SM/BF5
*300-5504-00*
300-5504-00
Warranty:
The Shop About has a Lifetime Warranty.
The electrical has a one year Warranty. The
power cord is not covered under Warranty. notices:
Technology Furniture and Shop About are
trademarks of Anthro Corporation. Anthro
reserves the right to modify the design and
specifications without prior notice.
Hello!
Thank you for purchasing ShopAbout™! Here are the instructions for repositioning the Dual-arm
Bag Holder and installing the Patch Handle Bag Holder. If you have any questions, please give us
a call!
REPOSITION THE DUAL-ARM BAG HOLDER
• Using the 5/32" hex driver, remove the four fasteners attaching the
Dual-arm Holder to the side panel.
• Remove the holder and align it in its new position with the hole array on
the side of the cart.
• Reinstall using the same fasteners.
INSTALL THE PATCH HANDLE BAG HOLDER
• Using the 5/32" hex driver, remove the four fasteners attaching the Dual-arm Bag
Holder to the side panel.
• Remove the Dual-arm Bag Holder.
• Align the Patch Handle Bag Holder with the hole array on the side of the cart.
• Using the 5/32" hex Anthro driver, install using the same fasteners.