Anthro Convoi Spec Guide - Manual (Page 3)

Convoi
38
take all the time you need
Whether you buy 1 or 100 of something, we’ll be happy to
chat with you, either by phone or online, for as long as it
takes to answer your questions and get you the right solution.
end Caps
• Required for Convoi configurations without a Cap Shelf, to top off the ends of the legs.
• Sold as a pair.
PRODUCT Width Depth Weight Part# Price
End Caps 2.5" 5" 2 lbs. BUEC $24.95
flat panel monitor solutions
Lots of choices for your flat panel monitor! Pick the features you need. note: all mounting options conform to vesa 75mm and 100mm mounting standards.
If you need a different standard or would like to discuss additional monitor solutions that we have available, give us a call.
flat panel monitor arm
• These steel arms have a vertical travel range of 16" and rotate 360°. Travel range depends on the size of your monitor.
• Mount with either a C-clamp to the edge of your cart or drill through a shelf for added security. Clamp opens a maximum of 2" and
requires 3.5" of vertical clearance below the shelf.
• The Single-Standard Arm and Single-Super Arm extend up to 22" from their mounting point.
• Ten-year warranty against manufacturing defects.
• The Single-Standard and Single-Super Arms are available in Black (BK) and Silver Metallic (SM). Light Arm is available in Black (BK).
PRODUCT Supports Monitors Weighing Weight Part # Price
Single-Standard 7.5-25 lbs. 20 lbs. LCDxx $239*
Single-Super 13.5-44 lbs. 20 lbs. LCD2xx $289*
Single-Light 2-13.5 lbs. 20 lbs. 770BK $269.95*
QuickShip available for Standard and Super arms only.
flat panel monitor mount
• Secure your displays to your cart with these mounts. Choose the height, features, and capacity that fit your needs. All meet VESA 75mm
and 100mm standards.
• The Single and Dual mounts use a 13" high stand and tilt-and-swivel knuckles to support your monitors. The Single (part #615zz)
supports a single display up to 22 lbs. The Dual (part #617zz) supports two displays up to 22 lbs. total and 17" across. The mount base
is 4.5"w x 4.5"d. Available in Silver Metallic (SM).
• need a mount that’s a little taller? Choose the Extension Tube – Large 26" and add a one-monitor knuckle to it. The Extension tube is a
2.5"-diameter tube with a 4.5"-diameter base. The tube has holes every inch for installation of a tilt-and-swivel knuckle assembly.
• Install by drilling through the shelf and securing to the shelf bracket with four bolts. Drill required for installation.
• Available in Cool Grey (CG) and Silver Satin (SS).
PRODUCT Weight Part # Price
Single Monitor Mount 7 lbs. 615SM $219.95
Dual Monitor Mount 12 lbs. 617SM $319.95
Extension Tube – Large 26" 5 lbs. ZET26zz $99.95
Single flat Panel Knuckle for Extension Tube - 26" 5 lbs. ZPMSzz $169.95
handle
• Use this handle to steer your Convoi with ease. Mounts at any height to Convoi’s legs on the left or right side.
• Measures 1.25" in diameter and extends 5" from the side.
PRODUCT Width Depth Weight Part# Price
Handle 18" 1.25" 4 lbs. BUHD $139.95
single monitor
dual monitor
18"
Prices subject to change.
*Not available for discount.