Anthro Tablet Charging Cabinets USB Sync Kit Assembly Instructions - Manual (Page 2)

Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
CONGRATULATIONS! YOUR USB SYNC KIT INSTALLATION IS COMPLETE!
*300-5565-00*
300-5565-00
Rev B, March 2013
Warranty:
The USB Sync Kit has a one-year warranty
against manufacturing defects.
Notices:
Technology Furniture is a trademark of Anthro
Corporation. Anthro reserves the right to
modify the design and specifications
without prior notice.
STEP 1 - CONNECT
ƒ Verify that your iPads are fully charged. Without a full
charge, devices will not sync.
ƒ Connect the hub to the power on the cart or cabinet. [A]
ƒ Connect your powered-up laptop to the hub using the
cord that came with the kit. [B]
ƒ Connect your devices to the hub, either [C] at the IT Area
(by unplugging the cords from the power adapter and
plugging them into the hub) or [D] at the User Area (by
disconnecting the charge cord from device and plugging
in the cords that came with the kit).
ƒ Connect the cart or cabinet to the power in the room.
STEP 2 - TURN IT OFF
ƒ Turn off the power switch on the cart or cabinet.
STEP 3 - TURN IT ON
ƒ Turn on the power switch on the cart or cabinet. Restoring power to your
device prompts it to check for updates.
A
D
C
B