NcSTAR VCBTREP3540G - Manual (Page 2)

2
VISM CBT Scope Series with Integrated Red Laser
Congratulations on the purchase of your new VISM CBT Scope! The CBT Series of Scopes give you
many great options so you can choose the scope that best fits your needs. Backed by a Lifetime Limited
Warranty, your VISM Scope will provide you with years of reliable service. This Owner’s Manual will help
you understand all of the features of your new scope. Follow all instructions carefully before initial use to
experience the best performance.
CBT Scope Series Features
1. Ocular Lens
2. Quick Focus Ring
3. Elevation Adjustment Dial
4. Laser Elevation Adjustment
5. Laser Windage Adjustment
6. Objective Lens
7. Rheostat and Battery Compartment 8. Windage Adjustment Dial
9. Quick Release Lever
10. Auto-Locking Latch
11. Integrated Weaver/ Picatinny type Mount
12. Mount Recoil Lug
13. Lock Nut
14. Allen Head Adjustment Screw
CAUTION: BE SURE THAT YOUR FIREARM IS UNLOADED AND POINTED IN A SAFE DIRECTION.
PRACTICE SAFE FIREARMS HANDLING PROCEDURES AT ALL TIMES.
NOTE: IF YOU ARE UNFAMILIAR WITH THE PROCESS OF MOUNTING A SCOPE, IT MAY BE
NECESSARY TO EMPLOY THE SERVICE OF A QUALIFIED GUNSMITH.
Mounting Your CBT Scope
The CBT Scope is equipped with a Quick Release Mount with an Auto-Locking Latch. To attach the
CBT Scope to a Weaver/ Picatinny/ MIL-STD 1913 type rail, move the Auto-Locking Latch located within
the Quick Release Lever away from the pivot point and swing the Quick Release Lever to the forward
(Open) position. Place the Quick Release Mount onto the optics rail, with the Recoil Lug placed into one of
the cross slots on the optics rail. Move the Quick Release Lever rearward (Closed position) to secure/tighten
the Quick Release Mount to the optics rail.
On the Left side of the Quick Release Mount is a Lock Nut and Allen Head Adjustment Screw. The
Allen Head Adjustment Screw is used to adjust the rail mount tension. To adjust the rail mount tension,