NcSTAR SUS31250G - Manual (Page 2)

2
NcSTAR EURO SERIES SCOPE
Congratulations on the purchase of your New NcSTAR Euro Series Scope! The Euro Series of scopes
gives you many great options, so you can choose the scope that best fits your needs. Backed by a
Lifetime Limited Warranty, your NcSTAR Scope will provide you with years of reliable service. This
Owner’s Manual will help you understand all of the features of your new scope. Follow all
instructions carefully before initial use, to experience the best performance.
Euro Series Features
Mounting Your Scope

CAUTION: BE SURE THAT YOUR FIREARM IS UNLOADED AND POINTED IN A SAFE
DIRECTION. PRACTICE SAFE FIREARMS HANDLING PROCEDURES AT ALL TIMES.
 NOTE: If you are unfamiliar with the process of scope mounting it may be
necessary to employ the service of a Qualified Gunsmith.
Once you have the scope mounted in the rings (before final tightening), it is necessary to adjust the
scope’s position in the rings to allow for Maximum Eye Relief and reticle leveling. Slide the scope as
far forward as possible in the rings. While viewing through the scope in a normal shooting position
(properly shouldered firearm and a proper cheek weld on the stock) move the scope back towards
your eye until a Full Field of View is achieved while ensuring that the scope will be a safe distance
from your eye when the firearm recoils. Without disturbing the Eye Relief settings, aim the reticle at
a plumb line. Align the vertical cross hair of the reticle with the plumb line by rotating the scope
within the rings. Once you are satisfied with your scope settings and placement, tighten the rings
evenly and securely according to the Manufactures Specifications. Be sure not to over tighten the
rings as doing so can cause permanent damage to the scope.