NcSTAR SM3RAO62450G - Manual (Page 4)

4
Windage and Elevation Adjustment Dials
The Mark III scope is equipped with Target Style Elevation and Windage Turrets, which change your
scope’s point of aim relative to your rifles point of impact. The Elevation Adjustment Turret [E] is
located on top of the Turret Body, and is responsible for the up and down movement of the reticle.
The Windage Adjustment Turret [F] is located on the right side of the Turret Body, and is responsible
for the left and right movement of the of the reticle.
On the top of each Turrets you will notice that there are
arrows indicating direction of movement.
Turning the Elevation Adjustment Turret [E] counter-
clockwise will shift the bullet point of impact up, and
turning it clockwise will shift the bullet point of impact
down. Turning the Windage Adjustment Turret [F]
counter-clockwise will shift the bullet point of impact
right, and turning it clockwise will shift the bullet point of
impact left.
The Elevation and Windage Adjustment Turrets also
feature Audible and Tactile Clicks. Which not only can
you see and hear the adjustments, but you can feel
them as well.
Side Parallax Adjustment Dial
On a few select Mark III scope models will have a Side Parallax Adjustment Dial [G]. The Parallax
Adjustment Dial will fine tune the parallax alignment of the scope, so that you can properly adjust the
parallax of your reticle to the target image in the scope.
If you do not have the parallax adjust properly, the reticle will seem to move in relations to the target
image, if you were to move your head around the ocular lens.
Have the scope on a stable setup/platform, while viewing your target through the scope. Adjust the
Side Parallax Adjustment Dial in either direction until the reticle stays perfectly still on your target, if
you were to move your head around the ocular lens while viewing through the scope. With the reticle
properly adjusted, the reticle should remain still on your target (as if the reticle was painted onto the
target). Adjusting the parallax so that the reticle is stationary against the target image will help the
shooter make a more precise shot at longer distances and help with shooting a more consistent and
tighter groupings.