Mixing your capture sessions — 30, Creating a mix in capture 2.0 — 30, 7mixing your capture sessions – PreSonus Capture 2.0 User Manual
Page 32: 1 creating a mix in capture 2.0, 0 software reference manual, Input
30
7
Mixing Your Capture Sessions
7.1
Creating a Mix in Capture 2.0
Capture
™
2.0 Software
Reference Manual
7
Mixing Your Capture Sessions
7.1
Creating a Mix in Capture 2.0
You can’t mix directly in Capture 2.0; instead, you mix with the StudioLive.
The individual outputs of each audio track in Capture 2.0 are hardwired to
the FireWire Returns for each corresponding input channel on the StudioLive
mixer. With the FireWire Returns engaged for each input channel on your
StudioLive mixer, the output of your multitrack Capture 2.0 Session is routed to
the StudioLive mixer, where it can be mixed just like any other audio input.
The process of creating a mix with Capture 2.0 and the StudioLive
mixer is quite simple. Play back your recorded tracks through the
StudioLive and record the main output of the StudioLive to the Auxiliary
Stereo Track in Capture 2.0. The process works as follows:
1. StudioLive 24.4.2 owners: In VSL, select “Main L/R” for Auxiliary Inputs 25 and 26.
StudioLive 16.4.2 owners: In VSL, select “Main L/R” for Auxiliary Input 17 and 18.
StudioLive 16.0.2 owners: In VSL, patch “Main L/R” to Flexible Inputs
15 and 16. Please note: If you wish to create a mix using Capture 2.0,
you will not be able to record using analog inputs 15 and 16.
2. Be sure that Record Arm is disabled for all audio-input tracks
in Capture 2.0 and that the FireWire returns for all input
channels on the StudioLive mixer are engaged.
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input