beautypg.com

2 location - cold water installation – Stuart Turner CH 4-30 B User Manual

Page 8

background image

- 8 -

Cont ...

2 LOCATION - COLD WATER INSTALLATION

2.26

The cold water supply: The supply must be AIR FREE and have a

DEDICATED CONNECTION to the tank which should be via a tank connector,

positioned at a slightly lower level (25 mm minimum) than the feed pipe to the hot

water

cylinder.

Do not connect to the mains.

Fig. 4

Cold water
pump

Static inlet pressure

Min. 1 m

Max. 10 m

Static outlet pressure

Max. 13 m

This manual is related to the following products: