MAHLE RTI BRC450 - Manual (Page 5)

Page 3
III. Checking out the parts
A. The BRC450 and BRC450L lathe comes standard with:
Main lathe housing assembly.
Power Cord
90 mm (3 9/16") Cranks with Precision Adjusting Nuts and attachment nuts/washers (Qty=5)
Note these are color coded: Blue, Green, White, Black, and Red
27 mm wrench for the Precision Adjusting Nuts on the Cranks
17/19 mm combo wrench
Allen wrench-standard
Allen wrench-two size combo
Centering Plate (3, 4, 5, or 6 lug)
Tommy Bar for loosening Centering Plate
10 mm (3/8 “) thick spacers (Qty=6)
Adjustable Support Cane
Hand-held mini-lubrication pump for slideway nipples.
12 mm (3/8") Positive Rake disc cutting tip holders. (One RH, one LH)
RTI Positive Rake Cutting Tips. (Qty=10)
Vibration dampening rubber ring for discs.
B. BRC450 comes with additionally:
Transport/Setup Lift
Main Body
Casters (Qty=3)
Hydraulic jack assembly with handle
Bottom legs (Qty=2)
Short horizontal arms (Qty=2)
Vertical arm with stop gusset
Long horizontal arm with solid bar
Spring
Platform assembly
Locking pin
Set of assembly/mounting hardware
Dial Indicator Set with Gooseneck Clamp
C. Optional items:
35 mm deep 3,4,5,6 Centering Bell needed for some 4WD.
Set of (5) 90 mm (3 9/16") Cranks (Additional)
Set of (5) 104 mm (4-1/16") Cranks for some 4WD
Set of (2) 90 mm (3-1/16") Cranks (Additional)
35 mm deep 7 hole Centering Bell needed for Ford 7 lug
Set of (2) 104 mm (4-1/16" Cranks for Ford 7 lug (see #3 and 4)
Bench mount kit.